Lithonia Lighting IB 632 MVH Przewodnik Instalacji Pobierz pdf (Strona 2)

I-BEAM

®

Installation Instructions

Lithonia Lighting

INDUSTRIAL VALUE STREAM

One Lithonia Way, Conyers, GA 30012

Phone: 800-315-4963 Fax: 770-981-8141

www.lithonia.com

Revision Date:10/2007

Part Number: U21293

TROUBLE SHOOTING

If this fixture fails to operate properly, check to make sure:

 The Correct lamp is properly installed.

 The fixture is wired correctly.

 The lamp is not faulty.

 The fixture is grounded correctly.

 The line voltage at the fixture is correct.

I-BEAM INSTALLATION INSTRUCTIONS

INSTALLATION OF THIS FIXTURE IN ANY OTHER MANNER THAN WHAT IS INDICATED WITHIN THE SUPPLIED

INSTRUCTIONS WILL VOID ALL WARRANTIES.

These instructions are for NORMAL On/Off operations.

Remove fixture from packaging.

Ensure proper voltage will be supplied to the fixture. Check the fixture label on the carton for fixture voltage. FIXTURE

MUST BE GROUNDED BEFORE USE.

Picture #1

WIRING OF FIXTURE

1. Remove back access plate by removing 1 phillips screw. Retain the screw and

access plate for re-installation. (Picture #1)

Picture #2

2. Remove the twist tie and separate the wires.

(Picture #2)

Picture #3

3. Attach the conduit connector to the access plate in accordance with your local

electrical code. Push the wires through the knock out on the access plate and wire

to the supply wire as shown in (pictures #3 and #4.) Ensure wires are not being

pinched. Make all necessary wiring connections, observing proper voltage

and polarity.

Picture #4

4. Center the access plate to the back of the fixture. Re-attach the access plate.

Lithonia Lighting IB 632 MVH Przewodnik Instalacji Strona 2